|
|
|
|
|
|
  | 2/27/2012
Negri Bossi and Sacmi at Npe in Orlando to present their latest range of products
From the revolutionary EOS to the innovative CHS vision system used to eliminate closure defects.
| Npe, the most important exhibition in the world for the plastics industry, will take place from April 1 to 5 at the Orange County Convention Center in Orlando, Florida. This occasion is not to be missed by the Sacmi Group, with its several decades of experience in the sector and important innovations that will be on show at West Hall Level II, booth 925.
Of all these innovations, Negri Bossi’s EOS, an absolute novelty offered in a wide range from 50 to 120 tons, allows the lubrication system in the mold area to be eliminated thanks to its innovative 2-platen clamping system that is also responsible for its compact dimensions. The model displayed at Npe will be equipped with a mold for producing medical items (butterfly I.V. catheters). From the EOS jewel one passes to the consolidated hybrid JANUS series, another top of the line product on display at the exhibition, which is integrated to the lateral Sytrama IML robot, which uses an “in mold labelling” article application and is produced by Sytrama, a recent Negri Bossi acquisition.
Awaited products at the exhibition are also the CANBIO hydraulic press, and the VESTA, presented with a 48-cavity mold for syringe production.
Switching over from Negri Bossi to Sacmi, this company is presenting the acclaimed CCM48SB, characterized by excellent production performance, producing up to 1,600 caps per minute thanks to significantly reduced cycle times, and extremely reduced energy consumption. The high cavity output makes this device the ideal solution for light single-piece cap production for water (molding diameters up to 33 mm), as well as making it a versatile solution for single and double piece caps for CSD (Carbonated Soft Drinks).
Integrated on the CCM exit belt, will be the CVS 052 (CVS 3000) vision system produced by Sacmi for real time control of the caps.
Sacmi continues to invest in vision systems with the CHS 003 “stand-alone” system that controls plastic and aluminum screw caps. There are several highly sophisticated systems that can be integrated into the basic version of this CHS. For example, the 4-camera version, the CVS 360, provides total control of lateral wall cap development, including the search for any burrs on the cap jumpers with injection-molded safety bands.
From the advantages of continuous compression moulding, then, to those provided for other stages of production in the beverage industry. Sacmi, in fact, is the only market leader in the industry able to provide two alternative technologies for preform production: compression and injection.
For example, there are the new rotary SBF blow formers; having from 6 to 24 blowing stations, these machines ensure hourly output rates of over 64,000 standard half-litre bottles.
One key advantage with these blowers is that each machine in the range can be equipped with a 1-cavity mould for a large bottle (up to 3 litres) or a 2-cavity mould for smaller bottles (up to 0.6 litres).
Press release
|
|
|
|
|
|
|
|
|
|